Good News, iPhone Stuck in Headphone Mode? 5 Ways to Fix It

The problem is characterized by the inability to play audio files and make a phone call because the device continuously sends audio to headphones that don’t exist. Many users experience their iPhones getting stuck in headphone mode and this guide guides you on how to fix the problem.

Why does the iPhone get stuck in headphone mode?

There are several reasons why your iPhone might get stuck in headphone mode. Common causes include

• Presence of moisture or dust in the jack port
• software error
• Disconnecting the headphones while the phone is busy
• Using bad headphones that damage the jack port.

Read Also: Best Bluetooth Speakers for Home in 2023

way to fix iPhone is stuck in headphone mode

The problem exists in all types of problems and you can solve the problem only by understanding the cause. Below are some ways to get the iPhone out of headphone mode:

• Plug and unplug your headphones

The most common solution to an iPhone stuck in headphone mode is to plug and unplug the headphones. It works for all types of iPhones (3.5mm jack and lightning port). Plug in the headphones for a few seconds and then remove them. Presumably, the phone will revert to its default algorithm, that is, to relay audio to the headphones.

• Enable and disable aeroplane mode

Another solution is to enable and disable aeroplane mode for the problem, which is more suitable for headphones connected via Bluetooth Enabling the mode disables cellular, voice, Wi-Fi and Bluetooth connections This is similar to turning off your device to a certain degree.

While this works best for Bluetooth headphones, you can also try it with wired headphones. You can enable and disable aeroplane mode by following the steps below:

iPhone X is on top

1. Swipe down on Control Panel
2. Click on the aeroplane icon to make it blue
3. Click the icon again after a few seconds

An iPhone SE and 8 below

1. Swipe up on Control Panel
2. Click on the aeroplane icon to make it blue
3. Click the icon again after a few seconds

Restarting your iPhone will reboot the OS and apps to a new slate. There is a high probability that the error will go away after a restart. Follow the steps below to restart your device:

An iPhone SE and 8 below

1. Press and hold the Power button until the Power Off slider option appears
2. Drag the slider towards the Turnoff option.
3. Press and hold the Power button until the Apple logo appears.

For an iPhone SE (2nd Generation), 6 or later:

1. Press and hold the Power and Volume buttons until the Power Off slider option appears
2. Drag the slider towards the Turnoff option.
3. Press and hold the Power button until the Apple logo appears

• Remove any lint, debris, or dirt from the lightning port

A build-up of dirt in the jack port can make your iPhone think there’s a plug-in headphone in there. Therefore, you need to clear the port to fix the problem. To do this, you will need a flashlight, a toothpick and a can of compressed air. Below is a step-by-step procedure:

1. Turn off your device
2. Use a toothpick to gently scrape the port wall
3. Release a blast of air into the port to remove the remaining dirt.
4. Turn on iPhone

• Use TunesKit iOS System Recovery

For software issues, the above methods probably won’t work. Consequently, the best method to try is an iOS system restore. TunesKit iOS System Recovery is a valuable iOS repair tool available on Windows and Mac and boasts the following features:

• Restore your iOS device to a normal state at home without any data loss
• Fix common iOS system problems like the white apple logo, boot loop and black screen
• Fix critical issues such as iPhone won’t recover in recovery mode
• Downgrade the iOS version without jailbreak
• Enter and exit recovery mode on iPhone/iPad/iPod touch
• The device must be compatible with the latest iOS version

The tool is suitable for solving common iOS problems like standard repair mode iPhone stuck in headphone mode. Additionally, it does not lead to any data loss and will make iOS normal. Follow the steps below on how to use iPhone System Recovery software to fix the problem:

Step 1: Download and launch TunesKit iOS System Recovery

Download and launch TunesKit iOS System Recovery on your computer. Then, connect the iPhone to the PC using a USB cable.

After detecting the iPhone, click iOS System Repair. In the next window, select Standard repair And click Next. Select the iPhone you connected and follow the instructions to put it in DFU mode. After that, click on the “Next” button.

Step 2: Download the firmware package

The tool will prompt you to download the latest firmware package for your device. Ensure correct device information such as model version and iOS version Correct any errors. Otherwise, click the Download button to start downloading and verifying the firmware.

Step 3: Restore iOS System

After downloading, click the Repair button to fix the tool. Make sure the device is connected throughout the fixing process or it may brick.

Conclusion

Stuck your iPhone in headphone mode is a normal but undesirable occurrence. So, the next time you feel it, don’t panic. The problem can be hardware or software-related and there are various methods to fix it. By using any of the methods above, we hope we’ve helped you resolve the issues, meaning your headphone problems are a thing of the past.